----------------------------------------------------------- Mon Feb 6 18:17:01 EST 2012 malleus ----------------------------------------------------------- arrayprobe -r -f /dev/cciss/c0d0 ----------------------------------------------------------- Retrieving logical drive information from controller /dev/cciss/c0d0 Number of logical volumes (00 00 00 08) : 1 Controller /dev/cciss/c0d0 reports 1 logical drives Logical drive 0 found on controller /dev/cciss/c0d0 Event code 5/0/0 at 4-7-2009 03:07:03 with message: State change, logical drive 0 logical drive 0, changed from state 4 to 5 state 4: Logical drive is ready for recovery operation state 5: Logical drive is is currently recovering Event code 4/0/0 at 4-7-2009 03:07:17 with message: Physical drive failure: SCSI port 1 ID 0 physical drive 0 has failed with failurecode 31. this drive is part of a logical drive Event code 5/0/0 at 4-7-2009 03:07:17 with message: State change, logical drive 0 logical drive 0, changed from state 5 to 3 state 5: Logical drive is is currently recovering state 3: Logical drive is using interim recovery mode Event code 5/0/3 at 4-7-2009 03:07:18 with message: Rebuild aborted due to write error, logical drive 0 Event code 5/0/0 with message: State change, logical drive 0 logical drive 0, changed from state 3 to 4 state 3: Logical drive is using interim recovery mode state 4: Logical drive is ready for recovery operation Event code 5/0/0 at 8-20-2009 00:05:34 with message: State change, logical drive 0 logical drive 0, changed from state 4 to 5 state 4: Logical drive is ready for recovery operation state 5: Logical drive is is currently recovering Event code 4/0/0 at 8-20-2009 00:06:01 with message: Physical drive failure: SCSI port 1 ID 0 physical drive 0 has failed with failurecode 31. this drive is part of a logical drive Event code 5/0/0 at 8-20-2009 00:06:01 with message: State change, logical drive 0 logical drive 0, changed from state 5 to 3 state 5: Logical drive is is currently recovering state 3: Logical drive is using interim recovery mode Event code 5/0/3 at 8-20-2009 00:06:02 with message: Rebuild aborted due to write error, logical drive 0 Event code 5/0/0 with message: State change, logical drive 0 logical drive 0, changed from state 3 to 4 state 3: Logical drive is using interim recovery mode state 4: Logical drive is ready for recovery operation ----------------------------------------------------------- array-info -d /dev/cciss/c0d0 -acA ----------------------------------------------------------- Compaq Smart Array 5i Firmware revision : 2.66 Rom revision : 2.66 1 logical drive configured. Logical drive 0 : Fault tolerance : RAID 1 (Mirroring) Size : 136.73 GiB (286734240 blocks of 512 bytes) Status : Logical drive is using interim recovery mode (100.00% done)